Tile Adhesive And Block Jointing Mortar

Product Price :Get Latest Price

Product BrochureProduct Details:

DESCRIPTION:
Ready to use grey cement based non-shrink, self curing tile adhesive for fixing tile on wall and floor.

USES: 
Fixing ceramic tiles on floor and wall surfaces.

CHARACTERISTICS / ADVANTAGES

Ready to use, only water to be added.
Contains special chemicals to obtained non-shrink and excellent adhesion properties. 
Better bond than conventional cement based mortar.
Fast setting and quick strength development
Self curing Good mechanical strength
Suitable for fixing Ceramic tiles on wall and floor.

PRODUCT INFORMATION:

MIXING:Sika® Tilofix must be mechanically mixed using a forced action mixer or in a clean container using a drill and mixing paddle (< 500 rpm). A normal concrete mixer is not suitable. Mix thoroughly with clean water for a minimum of 3 minutes.

Consumption:
~2.5-3 kg powder required / Sqm for 3mm average thickness. ~100-120 Sq ft is covered by a bag of 30kg for 3mm thickness depending on the substrate level.

Storage Conditions:
To be stored properly in dry conditions and not under direct sunlight

Mixing Ratio:
Water : Powder = 0.22 to 0.24 by weight (6.6 L to 7.2 L water per 30kg bag)

Shelf Life:
12 months from date of manufacturing if stored properly in original, unopened and undamaged sealed pack.

Product Price :Get Latest Price

Product BrochureProduct Details:

DESCRIPTION:
SikaCeram®-288 H is deformable, one-pack adhesive consisting of high resistance cements, high polymer content, selected silicon / quartz mineral charges and specific additives.

It can create deformable adhesive layers up to 15 mm thickness. It is suitable for porcelain and natural stone on façades, heated floors, swimming pools and industrial floors.

USES:

• Laying all kind of ceramic, vitrified tiles, including large porcelain
• Laying thin porcelain stoneware slabs
• Laying marble and natural stone, provided not sensitive to water
• Indoor and outdoor, on walls and floors
• Laying on heated floors, water and electric systems
• Indoor over-tiling applications on old tiles, without primer
• Suitable for applications where high performance is demanded, such as swimming pools, industrial and heavy trafficked floors, façades.

CHARACTERISTICS / ADVANTAGES

• Deformability
• No vertical slipping
• Extended open time
• Application upto 15 mm thick

APPROVALS / STANDARDS 

Deformable, one-pack improved cement base adhesive. Particularly suitable for refined porcelain stoneware and large-sized natural stones. Use on heating floor surfaces, façades, industrial floors and swimming pools. EN12004 class C2TE S1.


PRODUCT INFORMATION

Chemical Base:Portland cement, selected aggregates, water retention additives and re-dispersible polymer.

Storage Conditions:12 months from the date of production, if stored properly in undamaged original sealed packaging, in dry cooled conditions. 

Mixing Ratio:
• ~7.25-7.75 litres of water (29% - 31%) for 25 kg of SikaCeram-288 H Grey
• ~ 8.25-8.75 litres of water (33% - 35%) for 25 kg of SikaCeram 288 H White


Consumption: The consumption is dependent on the surface profile and roughness of the substrate as well as on the size of the tiles and the application technique (double-spreading, in thin-bed consistency, or single-Spreading, in flow-bed consistency). As a guide, in kilograms of powder per m² : 1.2 kg / m2 /mm of thickness.

Curing Time:Applied product ready for use: Before floor grouting - light foot Traffic 24-36 hours Before wall grouting 4- 6 hours

Shelf Life:12 months from date of production. 

Product Price :Get Latest Price

Product BrochureProduct Details:

DESCRIPTION:
Sika® Wall Decor is ready to use water resistant white cement based finishing / smoothening material for indoor and outdoor plastered surfaces.

USES:

White cement based finishing / smoothening material for      indoor and outdoor plastered surfaces Renders a smooth and durable surface and acts as an under layer for all kinds of decorative paints.

CHARACTERISTICS / ADVANTAGES:

Excellent white look & smooth finish
Excellent water resistant capability
Reduces paint consumption
Never peels off
No flaking
No Blistering
No Chalking
Good breathability Superb Bonding- White Cement base provides great adhesion to walls 
Better Coverage
Can be applied on moist surface
Excellent workability & ease of application Can be stained with a good quality water based Stain for light shades
Pre-tinted form can be used as a decorative coating without the use of conventional paint 

PRODUCT INFORMATION:

Storage Conditions: 8 months from date of production if stored properly in unopened original packaging. Protect from frost. 

Consumption: ~ 1.0 kg powder / m2 / mm thickness. Sika® Wall Décor covers an approx 18-22 sft / kg /mm in 2 coats on smooth finish substrate in optimum conditions.

Shelf Life: 8 months from date of production.

Approx. Rs 10.30 / KgGet Latest Price

Product BrochureProduct Details:

READY TO USE MORTAR FOR FIXING AAC BLOCKS, CONCRETE BLOCKS & FLY ASH BRICKS

DESCRIPTION  : Ready to use grey cement based non-shrink, self- curing mortar for fixing AAC blocks, Concrete blocks, flyash bricks etc.

USES : Fixing and Jointing masonry units like AAC blocks, Concrete blocks, fly ash bricks etc.

PRODUCT INFORMATION : 

Chemical Base : Cementitious mortar modified with polymers.
Packaging : 30 kg bag
Appearance / Colour : Grey powder
Shelf Life : 6 months from date of production
Storage Conditions : Stored properly in original unopened, sealed and undamaged packaging in dry and cool conditions.
Density: Bulk Density : -1.33 kg/l (at +27°C)
Compressive Strength : >6 N/mm² at 28 days (According to EN 1015-11)
Tensile Adhesion Strength : ≥0.8 N/mm² (Accordng to EN1348)
Consumption: ~3 -4 kg powder required / Sqm for 3 mm average thickness.
Layer Thickness: 3-4 mm
Pot Life : 90 minutes

MIXING :Water: Powder = 0.22 to 0.24 by weight (6.6l to 7.2 lwater per 30 kg bag). Mixing Time : 3 minutes minimum.

Product Price :Get Latest Price

Product BrochureProduct Details:

READY TO USE NORMAL CEMENTITIOUS WITH NO VERTICAL SLIP TILE ADHESIVE FOR TILE SIZE UPTO 4 SFT. C1 T CLASSIFIED ACCORDING TO EN 12004

DESCRIPTION: 
SikaCeram®-155 is a cementitious polymer modifiedtile adhesive with no vertical slip. It can create adhesive layers up to 10 mm thickness. It is suitable for Tile size upto 4 sft on Floor and Wall. Indoor application only.

USES: For fixing Tile size upto 4 sft

PRODUCT INFORMATION : 

Chemical Base : portland cement, selected aggregates, water retention additives and re-dispersible polymer.
Packaging: 25 kg bag
Appearance / Colour :Grey Powder
Shelf Life: 12 months from date of manufacturing Storage Conditions If stored properly in undamaged original sealed packaging, in dry cooled conditions
Density: 1.31 kg/l (Bulk Density)

Consumption:  The consumption is dependent on the surface profile and roughness of the substrate as well as on the size of the tiles and the application technique (double-spreading, in thin-bed consistency, or single spreading, in flow-bed consistency).As a guide, in kilograms of powder per m² : 1.2 kg / m2 /mm of thickness.

Product Price :Get Latest Price

Product BrochureProduct Details:

DESCRIPTION:
SikaCeram®-155 is a cementitious polymer modified tile adhesive with no vertical slip. It can create adhesive layers up to 10 mm thickness. It is suitable for Tile size upto 4 sft on Floor and Wall. Indoor application only.

USES:
For fixing Tile size upto 4 sft.

CHARACTERISTICS / ADVANTAGES
No vertical slip
Application upto 10 mm thick.


APPROVALS / STANDARDS:
One pack normal cement based no vertical slip adhesive, Suitable for Tile size upto 4 sft. EN12004 Class C1T

PRODUCT INFORMATION:

Chemical Base:portland cement, selected aggregates, water retention additives and re-dispersible polymer.

Storage Conditions:
If stored properly in undamaged original sealed packaging, in dry cooled conditions.

Consumption:
The consumption is dependent on the surface profile and roughness of the substrate as well as on the size of the tiles and the application technique (double-spreading, in thin-bed consistency, or single spreading, in flow-bed consistency). As a guide, in kilograms of powder per m² : 1.2 kg / m2 /mm of thickness. 

Shelf Life:
12 months from date of manufacturing.

Product Price :Get Latest Price

Product BrochureProduct Details:

DESCRIPTION:
High performance cement base adhesive with no vertical slip and extended open time for fixing Vitrified Tiles, Glass Mosaic and Natural Stone. C2TE classified according to EN 12004

USES:
• Laying all kind of vitrified tiles, glass mosaic and natural stone.
• Laying marble and natural stone, provided not sensitive to water
• Indoor and outdoor, on walls and floors
• Indoor over-tiling applications on old tiles, without primer
• Suitable for applications where high performance is demanded, such as swimming pools, industrial and heavy trafficked floors.

CHARACTERISTICS / ADVANTAGES 
• No vertical slipping
• Extended open time
• Application upto 10 mm thick

APPROVALS / STANDARDS
One-pack improved cement base adhesive. Particularly suitable for Vitrified and natural stones. Use on heating floor surfaces, industrial floors and swimming pools. EN12004 class C2TE.

PRODUCT INFORMATION:

Appearance / Colour:Grey and White powder

Storage Conditions: 12 months from date of production if stored properly in undamaged original sealed packaging, in dry cooled conditions.

Density: 
Grey : 1.32 kg/l (Bulk Density)
White : 1.18 kg/l (Bulk Density)

Mixing Ratio:
• ~6.5-7 ltrs of water (26%-28%) for 25kg of SikaCeram-255 Grey
• ~6.75-7.25 ltrs of water (27%-29%) for 25kg of SikaCeram-255 White

Consumption:
The consumption is dependent on the surface profile and roughness of the substrate as well as on the size of the tiles and the application technique (double-spreading, in thin-bed consistency, or single-spreading, in flow-bed consistency). As a guide, in kilograms of powder per m² : 1.2 kg / m2 / mm of thickness.

Shelf Life:12 months from date of production

Product Price :Get Latest Price

Product BrochureProduct Details:

DESCRIPTION: High performance cement base adhesive with no vertical slip and extended open time for fixing Vitrified Tiles, Glass Mosaic and Natural Stone. C2TE classified according to EN 12004.

For more information, please go through the attached "Technical Data Sheet" (pdf). 

Product Price :Get Latest Price

Product BrochureProduct Details:

DESCRIPTION: Ready to use grey cement based non-shrink, self- curing mortar for fixing AAC blocks, Concrete blocks, fly ash bricks etc.

For more information, please go through the attached "Technical Data Sheet" (pdf). 

Product Price :Get Latest Price

Product Details:

Product Description:  Ready to use grey cement based non-shrink, self- curing, water resistance mortar for fixing AAC blocks, Concrete blocks, fly ash bricks etc.

Uses: Fixing and Jointing masonry units like AAC blocks, Concrete blocks, fly ash bricks etc.

Characteristics / Advantages:

• Ready to use, only water to be added.
• Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength.
• Better bond than conventional cement based mortar
• Faster to apply due to good spreadable properties.
• Excellent high strength & water retention properties
• Economical as quantity of mortar is less than conventional mortar
• Self-curing.

Appearance / Colours: Grey powder

Packaging: 30 kg bag

Storage Conditions / Shelf-Life: 6 months from date of production if stored properly in original unopened, sealed and undamaged packaging in dry and cool conditions