Water Proofing Chemicals and Systems

Approx. Rs 150 / KgGet Latest Price

1. Crack-bridging
2. Elastic
3. Good Impermeability against water ingress
4. Highly water resistant, arrest salt petre and prevent carbonation
5. Extremely good bonding with high abrasion resistance
6. Simple application and fast curing
7. It has excellent adhesion to concrete, brickwork, corrugated asbestos and asbestos cement.

Additional Information:

• Item Code: Topseal109hi
• Delivery Time: 4-5 Days

Product Price :Get Latest Price

• High resistance to aging
• High tensile strength and elongation
• Resistant to natural aggressive mediums in ground water and soil
• High resistance to mechanical impact
• High dimensional stability
• High flexibility in cold temperatures
• Heat weldable
• Suitable for installation on weak substrate
• Can be installed on damp and wet substrate

Additional Information:

• Delivery Time: 3-4 Day

Approx. Rs 130 / KgGet Latest Price

For more information, please go through the attached "Technical Data Sheet" (pdf). 

Additional Information:

• Delivery Time: As per Availability

Approx. Rs 85 / KgGet Latest Price

For more information, please go through the attached "Technical Data Sheet" (pdf). 

Additional Information:

• Delivery Time: As per Availability

Product Price :Get Latest Price

1. Medium to large roof slabs ( domestic, commercial and industrial).
2. Basements and raft slabs.
3. Underground car parks 
4. Bridges & Underpas

Additional Information:

• Item Code: SIKAWPSHILED103
• Delivery Time: EX-STOCK

Approx. Rs 184 / KgGet Latest Price

Approx. Rs 640 / RollGet Latest Price

^{Fiber Glass Mesh is used for reinforcement surfaces during plastering, installation leveling floors, waterproofing and restoration of cracked plaster in order to prevent cracking or fraying of the plaster.}

^{Fiberglass mesh is cheap material that does not burn and is characterized by both low weight and high strength. These properties allow it to be successfully used in the formation of plaster facades, as well as use on internal wall and ceiling surfaces. This material is widely used for fastening the surface layer at the corners of the room. Most widely used standard fiberglass plaster mesh is the density of 145g/m2 for interior and exterior cladding and facade work. Resistant to alkalis, does not decompose and will not rust over time, it does not emit toxic and harmful substances, has a high resistance to tearing and stretching, protects the surface from cracking and improves its mechanical strength.}

^{Easy to handle and use. This comes in width-1000 mm; length- 50 meters size. The thickness of the mesh is 45 GSM to 145 GSM.}

^{These products can be widely used in reinforcing light wallboard, internal and external wall, building component and plaster products; besides, they can also be sticked on the back of mosaic, marble and other stone materials of superior-quality.}

^{They are the most ideal building materials for reinforcement and are widely used during the innovation process of building materials for external wall.}

Additional Information:

• Item Code: Fibermesh45GSM
• Delivery Time: EX-STOCK

Product Price :Get Latest Price

• For roof waterproofing solutions in both new construction and refurbishment projects.
• For roofs with many details and complex geometry when accessibility is limited
• For cost efficient life cycle extension of failing roofs
• Characteristics /Advantages:
• UV resistant and resistant to yellowing and weathering
• Highly elastic and crack bridging
• Non-toxic and VOC compliant water based coating
• One component - ready to use.
• Excellent adhesion on porous and non-porous substrates
• Seamless waterproofing membrane 
• Water vapour permeable 
• 12 months shelf life

Additional Information:

• Item Code: Sikalastic560
• Delivery Time: 3-4 Days

Product Price :Get Latest Price

1. Green roofs
2. Ballasted roofs
3. Utility roofs

Additional Information:

• Delivery Time: 7-10 Days

Product Price :Get Latest Price

1. Water tanks
2. Basements
3. Flat roofs terraces and balconies
4. Bridges
5. Retaining Walls
6. Sea Walls

• Easy to apply by brush, slurry consistency
• Good adhesion to sound & prepared substrates
• Good abrasion resistant
• Protects against water penetration, salt & carbonation
• Non-toxic when cured, suitable for contact with drinking water
• Non-corrosive to steel & iron

Approx. Rs 62 / KgGet Latest Price

Additional Information:

• Item Code: PlastocretePlus
• Delivery Time: Ex-Stock

Approx. Rs 69 / KgGet Latest Price

To meet the needs of our clients in an efficient manner, we are providing a range of Crystalline Waterproofing Coating. These products offered by us are highly applicable for unique water proofing for basement, bathroom slabs, tunnels, swimming pools, lift pits, planter boxes and many more areas.

Product Description: Sika®-101h is a ready to use cement based powder capillary waterproofing system for concrete and mortar to prevent water infiltration or seepage of water in the area of low pressure of concrete structure or any cementitious substrate.

Uses : Sika®-101h forms slurry consistency when mixed with water. When it is applied to the concrete substrate it forms insoluble crystals inside water bearing capillaries and seal against further seepage of water. Sika®-101h blocks the pores in concrete structures such as :

• Basement
• Reservoirs
• Sewage water and effluent treatment plant
• Tunnel and underground subways
• Foundations
• Swimming pools
• Underground parking structures
• Water tanks

Characteristics /Advantages: It provides the following beneficial properties in post applied waterproofing :

• Easy to apply
• Can be used for positive and negative side waterproofing
• Helps in faster construction schedule
• Can seal hairline cracks
• Becomes an integral and homogenous part of the stucture
• Allows the substrate to breath
• No added chloride
• Non-toxic

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: All Indian Ports

Approx. Rs 69 / KgGet Latest Price

Product Description: SikaTop® Seal 107 is a two part acrylic polymer modified cementitious liquid applied waterproofing coating system 

Applications:

• Retaining walls
• Swimming pools
• Water reservoirs
• Balconies
• Flat Roofs
• Water tanks

Additional Information:

• Item Code: SIKATOPSEAL107
• Delivery Time: EX-STOCK

Approx. Rs 190 / LitreGet Latest Price

Product Description: Sika® Latex Power is a synthetic rubber emulsion which when added to cement slurry/ cement mortar/concrete/grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of mortar/concrete/ cementitious grout. 

Uses:

For waterproofing of roof slabs, sunken slabs, basements, water tanks, sunshades etc. in combination with cement

As a bonding agent for uses in repair and plastering

For making polymer mortar for repairs mortars etc.

Treatment for leaching and saltpetre action

Multipurpose mortar admixture for injection grouts

Characteristics / Advantages:

Improves elasticity, flexibility, tensile strength of cement and reduces cracking

Makes the mortar waterproof and reduces susceptibility to acids and gases, salt petre action etc.

Mortar with Sika® Latex Power shows extremely good bonding to bases like concrete, stone, brick etc.

Reduces viscosity of cement injection grout and improves bond of cured injected materials with substrates

Sika® Latex Power can be diluted with water (1 : 4 - 6) depending on the type of application

Screed required with Sikacim®/ Sika® Plastocrete Super to protect waterproofing layer

Standard coating system can be further reinforced by placing Sika??? Fab 1 fabric layer in between 1st and the 2nd coat.

Appearance / Colour: White (milky) liquid

Packaging: 250g, 500g, 1kg, 5kg, 10kg, 20kg

Storage Conditions / Shelf Life:  18 months from date of production if stored in undamaged and unopened, original sealed packaging, in dry conditions and protected from direct sunlight. Protect from frost.

Chemical Base: Styrene butadiene rubber emulsion.

Mixing: Sika® Latex Power is to be added to cement/ cement mortar/concrete/grout depending on the type of application as per the table above. Mixing of diluted Sika® Latex Power to cement mortar should preferably be done manually by volume as per the table.

Curing Treatment: 3-5 days with wet burlap/ gunny bag/ hessian cloth. Not to be ponded with water.

Additional Information:

• Delivery Time: EX-STOCK
• Packaging Details: 250g, 500g, 1kg, 5kg, 10kg, 20kg

Approx. Rs 150 / MeterGet Latest Price

Additional Information:

• Item Code: PVCWATERSTOPPER
• Production Capacity: 3000 METER
• Delivery Time: EX-STOCK

Approx. Rs 110 / KgGet Latest Price

Additional Information:

• Item Code: SikaCemcrete
• Delivery Time: Ex-Stock

Approx. Rs 150 / KgGet Latest Price

• Easy to use. 
• Improves bond Strength. 
• Increases durability under freeze/thaw cycling. 
• Reduce cracking through increased mortar flexural strength.
• Increases mortar wear resistance under rubber wheeled traffic.
• Repair mortar offers greater impact resistance.
• Due to low permeability, it can be used for waterproof sealing and lining of tanks etc. 
• Its food grade material-Specially designed for water tanks.

• Toppings, patches and leveling course.
• Thin Sets, terrazzo, stucco and bonding slurries.Repairs utilizing spray or fill coats.
• Heavy duty floors & high strength of concrete bonding.
• Repairs to pre-cast structural members.
• Architectural panels, bridge decks & high-way repairs.
• Resistance to mild chemicals, grease, alkaline and acid

Approx. Rs 330 / KgGet Latest Price

Recron® 3s acts as "secondary reinforcement" in concrete which arrests cracks, increases resistance to impact/abrasion & greatly improves quality of construction in walls, foundations, tanks, roads and pre-cast products like blocks, pipes, tiles, manhole covers, and more.
Recron® 3s Fibers are engineered Micro Fibers with a unique "Triangular" Cross Section used in secoundary Reinfrocment of Concrete .It Complements Structure Steel in enhancing concrete's resistance to shrinkage Cracking and improves mechanical properties such us Flexural /Split Tensile and transvers strength of Concrete along with the desired improvement in abrasion and impact stregnths.

Recron 3s Fiber are manufactured in an ISO 9001-2000 facility for use in concrete as a "Secoundry reinforcement" at a rate of dosage varying from 0.1% to 0.4% by volume (0.9 Kgs/Cu.M-3.60 Kgs/Cu.M).Fibers comply with ASTM C 1116 Type 111 Fiber reinforcment concrete.

Additional Information:

• Item Code: Recron3S
• Delivery Time: Ex-Stock

Product Price :Get Latest Price

• Uses as a seamless , impervious coating on roofs and concrete structures.
• Protective coating in infrastructure projects in civil engineering on non-trafficked areas
• It has an excellent adhesion to concrete, brickwork, asphalt, corrugated asbestos and asbestos cement
• Used for inverted roof structures

• Crack-bridging
• Elastomeric- cures with aerial moisture to a flexible and rubbery coating
• Single Component – No mixing and weighing at site
• Simple application – By Airless Spray or Roller
• Economic
• Root resistant
• Weather & uv resistant
• Abrasion resistance
• Hydrolysis resistant
• Resistant to mild acid and chemicals and industrial environment

Additional Information:

• Delivery Time: 2-3 Days
• Packaging Details: 20 kg container

Product Price :Get Latest Price

DESCRIPTION: Sikalastic®-621 TC is a cold-applied, one-component, seamless, highly elastic and UV-stable moisturetriggered polyurethane Top Coat (TC) designed to provide easy application and a durable solution as part of the SikaRoof® MTC systems, as well as for detailing on single ply membranes. Suitable for use in hot and tropical climatic conditions.
 
For more information, please go through the attached "Technical Data Sheet" (pdf). 

Additional Information:

• Delivery Time: As per Availability

Product Price :Get Latest Price

Additional Information:

• Delivery Time: As per Availability

Product Price :Get Latest Price

Description:

ShaliTex Primer is a solvent based bituminous primer that seals pores in surfaces such as concrete and improves the adhesion of bituminous materials that are to be applied to the substrate. It is suitable for brush or spray application. It conforms to the requirement of IS: 3384-1986.

Characteristics:

*Depending upon surface condition

Application:

• Priming bituminous, concrete or masonry surfaces prior to laying membrane promotes bonding, whether self-adhesive or otherwise.
• Applied in canal lining joints and concrete floor joints prior to pouring of the bitumen sealing compound for bonding.

Advantages:

• Seal pores on surfaces such as concrete
• Improves the adhesion of bituminous material that is to be applied to the substrate.

Packing:Available in 20 L & 200 L drum.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: All Indian Port

Product Price :Get Latest Price

• Waterproofing of flat and pitched roof structures
• Treatment of new construction and refurbishment of existing structures
• Applicable to existing concrete, roofing felt, brickwork, cementitious substrates, cement decks (subject to condition and priming requirements).
• For waterproofing underneath tiles bonded with adhesives on balconies and terraces.

• Single component - No mixing, easy and ready to use
• Cold applied- Requires no heat or flame
• Seamless membrane
• Compatible with Sika® Reemat Premium - easy to detail
• Easily recoated when needed - no stripping required
• Economic – provides a cost efficient life cycle extension of failing roofs
• Vapour permeable - Allows substrate to breathe
• Elastic - retains flexibility even at low temperatures
• Good adhesion to most substrates – see table
• Fast Curing - Free from rain damage almost immediately on application

Additional Information:

• Item Code: Sikalastic614
• Delivery Time: 7 Days

Product Price :Get Latest Price

• Easy to apply by brush or in thin trowel applications
• Single component
• Hand or spray applied
• Easy and fast mixing
• Simple application and Fast Curing
• Very good adhesion with sound and prepared substrates
• Non-corrosive to steel or iron
• Approved for potable water contact
• Flexible enough to bridge hairline crack
• Good sag resistance and easy to apply even on vertical surfaces
• Excellent adhesion to concrete, brickwork, corrugated and plain cement fiber sheets. etc

Additional Information:

• Item Code: SIKAFLEXICOAT1K
• Delivery Time: Ex-Stock
• Packaging Details: 30 kg HDPE bags

Product Price :Get Latest Price

For more information, please go through the attached "Technical Data Sheet" (pdf). 

Additional Information:

• Delivery Time: As per Availability

Approx. Rs 124 / KgGet Latest Price

• Easy to use. 
• Improves bond Strength.
• Increases durability under freeze/thaw cycling. 
• Reduce cracking through increased mortar flexural strength.
• Increases mortar wear resistance under rubber wheeled traffic.
• Repair mortar offers greater impact resistance.
• Due to low permeability, it can be used for waterproof sealing and lining of tanks etc.

• Toppings, patches and leveling course
• Thin Sets, terrazzo, stucco and bonding slurries
• Repairs utilizing spray or fill coats.
• Heavy duty floors & high strength of concrete bonding.
• Repairs to pre-cast structural members.
• Architectural panels, bridge decks & high-way repairs
• Resistance to mild chemicals, grease, alkaline and acid

Additional Information:

• Delivery Time: EX-STOCK
• Packaging Details: ACR 30 is available in 20 kg drum & 50, 200 kg. Barrel.

Product Price :Get Latest Price

For more information, please go through the attached "Technical Data Sheet" (pdf). 

Additional Information:

• Delivery Time: As per Availability

Product Price :Get Latest Price

For more information, please go through the attached "Technical Data Sheet" (pdf). 

Additional Information:

• Delivery Time: As per Availability

Approx. Rs 1,098 / KgGet Latest Price

Additional Information:

• Packaging Details: Pack A : 10 kg Pack B : 0.9 kg

Product Price :Get Latest Price

• Slope Roof Slab
• Flat Roof Slab
• Beams
• Columns
• Slabs
• Also used in:
• Internal and external plaster of buildings etc.
• Repair and renovation

• Compatible with all varieties of Portland Cement including Slag Cement.
• Easy to use
• Effective pore filler to prevent water seepage
• Easy compaction resulting in denser concrete
• Reduced shrinkage, better finish
• Rebound loss is low
• No added chloride- does not attack reinforcement
• Supplied in consumer friendly pack

Product Price :Get Latest Price

Product Price :Get Latest Price

Additional Information:

• Delivery Time: As per Availability

Product Price :Get Latest Price

Product Price :Get Latest Price

For more information, please go through the attached "Technical Data Sheet" (pdf). 

Additional Information:

• Delivery Time: As per Availability