Curing Compounds

Approx. Rs 1,035 / KgGet Latest Price

Product BrochureProduct Details:

Rapid foaming and setting resin for stopping flow of water.

Nitofill WS60 is a two part liquid polyurethane when mixed in the proportions supplied it reacts rapidly with water to form a foam barrier. 

Stops the flow of water when injected into cracks in concrete in the presence of moving water. Nitofi ll WS60 with Nitofill UR63 provides an eff ective system for crack sealing in wet conditions. 

Advantages
1. Seals against water: Reacts and produces foam resistant to water
2. Rapid acting : Rapid reaction to produce water stop in presence of flowing water
3. Reinjectable : Can be reinjected with Nitofill UR63 to produce a permanent seal.

Approx. Rs 29 / KgGet Latest Price

Product BrochureProduct Details:

Our expertise in this industry have enabled us to offer a gamut of Paraffin Based Concrete Curing Compound. Our offered range protects new concrete and reduces crazing, spelling and flaking on the surface and conforms ASTM C 309, Types 1 & 1D, Class B. It is non-flammable paraffin emulsion.

Characteristic:

• Physical Appearance: Milky white liquid
• Textured Concrete
• Smooth Concrete 4.9 7.4 7.4 8.6
• Drying time: < 1 Hr

Advantages :

 Provides a transparent curing film for new concrete.  Seals concrete surfaces to protect from the effects of    weathering.  Helps eliminate dusting and hardens concrete surface    by promoting proper cement hydration.  Resistant to yellowing.

Application Methodology : 


1. Concrete surface must be clean and free of standing water. Remove any sealer or other material that may prevent absorption of the Maruti Cure WB -P/E .

2. Requires no pre-blending and should be used directly from the container.
3. Apply at a uniform coverage by spray or roller application. Product may be sprayed with a hand held pump-up sprayer or with an airless industrial sprayer.
4. If roller applied, use a short napped, solvent resistant sleeve.
5. Allow the product to dry 4-6 hrs before exposure to traffic.
6. Do not apply to concrete surfaces at ambient temperature below 4C. Warm material to a minimum temperature of 10C before use.
7. Do not apply over bleed water or free standing water.
8. Do not apply over concrete to receive concrete toppings, epoxy, or urethane based coatings or adhesives.
9. For best cure of freshly placed concrete, apply Maruti Cure WB -P/E as soon as possible after finishing operations and / or immediately after the disappearance of the sheen of surface moisture.
10. When applying on old concrete, the surface must be clean and dry. Remove contaminants and stains such as waxes, grease and oil with strong soaps or caustics rather than acids. Badly worn or porous areas may need a second application to attain a uniform seal and surface gloss. Maruti Cure WB -P/E may be placed on top of a previous coat of the same product. The surface must be clean and dry for proper adhesion.

Cleaning & Maintenance : Clean tools and equipment with water before the material hardens.

Packing : 200 Kg drum.

Shelf Life : 9 months in original unopened sealed condition.

Approx. Rs 38.00 / KgGet Latest Price

Product BrochureProduct Details:

Description: ShaliCure PA M is a liquid, membrane forming curing compound for concrete. It protects new concrete and reduces cracking, spalling and flaking on the surface. It is non-flammable paraffin -pigmented emulsion.

It conforms to ASTM C 309, Types 2 & 1D, Class B.

Characteristics - Physical :


Characteristics - Technical:

Application : 

 Interior and exterior concrete.  Curing compound for fresh concrete.  Sealing old concrete.

Advantages: 

 Provides a transparent curing film for new concrete. Compatible with many paints, adhesives and resilient floor coverings.  Seals concrete surfaces to protect from effects of weathering.
 Helps eliminate dusting and hardens concrete surface by promoting proper cement hydration.  Resistant to yellowing.

Packing : Available in 20 Kg & 200 Kg drum.

Product Price :Get Latest Price

Product Details:

Product Description: A curing compound based on aluminised synthetic resin for the prevention of premature water loss from concrete. It is in ready to use form and simple to apply.

Uses: Antisol®-A is sprayed on to newly laid concrete surfaces to form a thin film barrier against premature water loss. Without disturbance to the normal setting action the concrete is then allowed to cure and achieve maximum properties. Antisol®-A is particularly useful in large areas of exposed concrete such as :

• Highways
• Runways and taxiways
• Aprons and hardstandings
• Roof decks
• Retaining walls
• Canals etc.

Characteristics / Advantages: Antisol®-A provides the following beneficial properties to concrete surfaces

• Reduces incidence plastic cracking
• Ensures achievement of desired strengt
• Minimises shrinkage
• Reduces dusting
• Increases frost resistance
• Alleviates other costly methods such as hessian-watering, etc.

Approval Standard : ASTM C309-89, Class B and BS 7542-1992

Aspect : Aluminized thin liquid

Packaging: 80 kg

Storage Conditions/Shelf-Life: 

365 days from date of manufacturing when stored properly in unopened original packaging . Keep in cool and dry place away from direct sunlight. Protect from frost.

Consumption / Dosage:  0.10 to 0.20 kg/m2 depending on wind, humidity and temperature. Actual dosage tobe finalised on the basis of site trials.

Application Method/ Tools: Antisol®-A has been designed for spray application to the newly laid concrete once the surface water has evaporated. A thin layer of Antisol®-A is then applied to the whole surface using a hand operated spraygun. For large areas application can be done by power driven automatic equipment. Stir well before use. After application the area concerned must be protected from rain for at least 2-3 hours.

Notes on Application/Limitations: Remaining Antisol®-A films must be removed prior to application of any screed,plaster or coating on the concrete surface.

Product Price :Get Latest Price

Product Details:

Customers can avail from us a quality-approved range of Single Component Acrylate Based Curing Compound. For interior and exterior concrete including terrazzo surfaces, the offered range cures concrete and provides a protective coating. Our range bonds tenaciously in order to concrete forming an inert, impervious film that is resistant to the alkali from fresh cement, salts and many construction stains. It impregnates the top surface of a floor, making it highly resistant to the penetration of dirt and staining materials.