Nakoda Enterprises
Nakoda Enterprises
Send Email
Call 0797138355373% Response Rate
Search

Home » Our Products » Cement Grout & Grouting Compounds


Cement Grout & Grouting Compounds

We are instrumental in offering an unbeatable range of Industrial Grouts. Under this range, we offer Two Components Epoxy Injection Grout, Single Component Non Shrink High Strength Grout, Two Component Polyester Resin Based Anchor Grout and Three Component Epoxy Grout. The entire range of products are fabricated using latest technology and advanced raw material by our trustworthy vendors. All these products are designed and developed by hard and fast compliance with international quality standard.


SikaGrout 214 S -Shrinkage Compensated Cementitious Grout

REQUEST CALLBACK

SikaGrout 214 S -Shrinkage Compensated Cementitious Grout
  • SikaGrout 214 S -Shrinkage Compensated Cementitious Grout
  • SikaGrout 214 S -Shrinkage Compensated Cementitious Grout
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 14 / KgGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity30 Kg
TypePOWDER
BrandSIKA iNDIA / FOSROC / MYK
Usage/ApplicationGROUTING
ColorGray
Packaging Size30 kg
Shelf Life6 Months

Product Description: 

Sika Grout 214 S is cement based flowable Grout with Selected Aggregate.

Uses: 
To grout bearings, machine foundations, columns joints in precast construction

To grout anchors in concrete

To grout cavities, gaps and voids in concrete

Characteristics / Advantages: 

ü  Easy to use (ready to mix powder)

ü  Easy to mix, only add water

ü  Adjustable consistency

ü  Very good flow characteristics

ü  Rapid strength development

ü  High final strengths

ü  Initial expansion by gas generation

ü  Impact- and vibration resistant

ü  Non-corrosive

ü  Not flammable, non-toxic

ü  Shrinkage compensated

 Product Data:

A.     Form :

1.    Appearance/Colour : Grey Powder

2.    Packaging                        : 30 Kgs

B.     Storage & Shelf Life: 6 Months from date of Production If stored properly in undamaged original Sealed Packaging, in dry condition at temperatures between +5ºC and +40ºC.

C.     Technical Date:

1.      Chemical Base             : Grey Cement, Cement Selected Fillers and Additives.

2.      Bulk Density                : ~1.3kg/L (of Fresh Grout)  at 27ºC

3.      Grading                        : 2.36 mm Down

4.      Layer Thickness          : 10mm Min / 100mm Max

5.      Standards                     : ASTM C 1107

6.      Consumption               : 2100~2300 Kg/M³ at water Powder ratio 0.14~0.16

7.      Pot Life                        : +20ºC: ~40 Min.

 

8.      Compressive Strength  :  ~37000 N/mm²

    Yes! I am Interested

    Single Component Free Flow Non-shrink High Strength / Fluidity Grout

    REQUEST CALLBACK

    Single Component Free Flow Non-shrink High Strength / Fluidity Grout
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Item CodeGROUT-NONSHRINK
    Usage/ApplicationGROUTING
    BrandSTP, MYK,FOSROC
    Packaging size25-30 KGS
    Packaging TypeBAG
    ColorCEMENTITIOUS

    We offer high quality Non Shrink Fast Setting Hydraulic Cement made up of Shali Screed SL AS is a multi-layer system comprising of ShaliPrime AS, Shali Screed SL AS – both Base Coat and Top Coat. The Total system gives a thickness of 3 – 5 mm with anti- static properties.


    Additional Information:

    • Item Code: SHALIGROUT
    • Delivery Time: EX-STOCK
    • Packaging Details: 25 KG BAG
    Yes! I am Interested

    Three Component Epoxy Grout

    REQUEST CALLBACK

    Three Component Epoxy Grout
    • Three Component Epoxy Grout
    • Three Component Epoxy Grout
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Packaging Type25 kg

    Shali Grout EP P (Formerly known as E3-HP) is a high performance epoxy grout designed for free flow grouting material for use in situations where heavy dynamic and mobile loads are encountered. Shali Grout EP P is characterized by low shrinkage, high bearing surface, low creep and excellent flow-ability and is the choice for the toughest and most demanding epoxy installations where bond to existing foundation and machinery is critical. It meets the requirements of ASTM C 307, Type I, Grade II, Class A. and meets the thermal compatibility with concrete requirements of ASTM C 884.


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
    • Port of Dispatch: All Indian Port
    Yes! I am Interested

    Single Component Injection Grout

    REQUEST CALLBACK

    Single Component Injection Grout
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    We offer high quality of Single Component Injection Grout which are made of high quality raw material which are manufactured by the highly trusted vendors. These material are highly in demand for its unique characteristics.

    Characteristics:


    • Compressive Strength: 50 mm cube, Kg / Cm2
    • Increases due to reduced water cement ratio Setting time
    • Chloride Content NIL
    • Expansion: 1 to 4% unrestrained expansion to compensate for plastic shrinkage of cement
    • Time for expansion will be 15 minutes to 2 hours depending on temperature
    Yes! I am Interested

    Three Component Epoxy Grout

    REQUEST CALLBACK

    Three Component Epoxy Grout
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure

    Our organization is instrumental in supplying and trading a wide range of Three Component Epoxy Grout. The offered range provides high performance, which are designed for free flow grouting material for use in situations where heavy dynamic and mobile loads are encountered. Our range is characterized by low shrinkage, high bearing surface, low creep and excellent flow-ability and is the choice for the toughest and most demanding epoxy installations where bond to existing foundation and machinery is critical. It meets the requirements of ASTM C 307, Type I, Grade II, Class A. and meets the thermal compatibility with concrete requirements of ASTM C 884.

    Yes! I am Interested

    Two Components Epoxy Injection Grout

    REQUEST CALLBACK

    Two Components Epoxy Injection Grout
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Our organization is one of the trusted names engaged in offering a commendable range of Two Components Epoxy Injection Grout to our customers. The offered range are two component high modulus, low viscous material used for injecting and sealing the cracks and voids in the concrete structures.

     

    Advantages:

     

    • Low viscosity for pressure injection of fine cracks
    • Moisture intensive for bonding on both dry or damp surfaces
    • Provides a tough, weather resistance seal for porous concrete
    • Penetrates deep into the cracks and fissures
    • Coverage/ Dosage: Depends upon the usage
    • Packing : 10 Kgs (2 Kgs x 5) 
    Yes! I am Interested

    Expanding Grout Admixture-Sika Intraplast N-200

    REQUEST CALLBACK

    Expanding Grout Admixture-Sika Intraplast N-200
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 45 / PouchGet Latest Price

    Product Details:
    Minimum Order Quantity10 Pouch
    BrandSIKA INDIA
    Packaging Size200 GM X 50 POUCH
    Coverage Area0.40% by weight of cement (200 gm per 50 kg bag of cement).
    TypeLight Brown Powder
    ColorLight Brown
    Grade StandardIndustrial Grade
    Packaging TypeBag
    Type Of AdmixtureModified Napthalene
    FormPowder
    Shelf Life12 months from date of production if stored as per recommendation
    Density~0.80 kg/l at 27 DegreeC
    Country of OriginMade in India

    DESCRIPTION : Sika® Intraplast® N-200 is an expanding grout admixture for pressure/injection grouting. By introducing into the concrete mix, wet volume expansion and increasedfluidity without segregation are produced.

    USES : Intraplast® N 200 is used to increase flow and cohesion in cement grouts (addition of sand is possible) andto develop non-shrink property. This product can beused for grouting of : Pre-stressed cable ductsRock and soil anchoringBearing platesPre-placed aggregatesTunnel linings

    CHARACTERISTICS / ADVANTAGES :  

    • Improved fluidity
    • Increased cohesion
    • Volume expansion in the wet state to develop nonshrin property
    • Chloride free - does not attack reinforcement or
    • prestressed cables
    Recommended Dosage : 0.40% by weight of cement (200 gm per 50 kg bag of cement).


    Storage Conditions: Store properly in dry conditions in undamaged and unopened original sealed packaging. But after opening, it should be consumed within one month & should be packed properly after use.
    Yes! I am Interested

    Plasticized Expanding Grout Admixture-Fosroc Cebex 100

    REQUEST CALLBACK

    Plasticized Expanding Grout Admixture-Fosroc Cebex 100
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 65 / PouchGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity225 Pouch
    BrandFOSROC
    Usage/ApplicationConstruction
    Packaging Size225 GM
    TypePowder
    StandardBS 8110 Part 1, 1985, section 8.9.4.6
    ColorDark Brown
    Grade StandardIndustrial Grade
    FormPowder
    Shelf Life12 Month
    Country of OriginMade in India

    Uses : Cebex 100 is an admixture for cementitious grouts andconcrete where a reduced water/cement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing.

    Advantages : 

    Gaseous expansion system compensates for plasticshrinkage and settlement in properly designedcementitious grout.
    • Reduced water/cement ratio in the grout mix ensures low permeability and long-term durability in service.
    • Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.
    • No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.
    • Composition allows high early strength development in grouts, without the use of chlorides.
    Standards compliance : Cebex 100 is a suitable pre-stressing grout admixture when complying with BS 8110 Part 1, 1985, section 8.9.4.6.

    Description :  Cebex 100 is supplied as a powder admixture. The material is a combination of a plasticising agent and a gas-producingexpansion medium. The plasticising agent allows the use ofa reduced water/cement ratio with consequent increasedstrength and durability. The expansive medium counteractsthe natural settlement and plastic shrinkage of the grout andaids stability and cohesion.
    Sufficient restrained expansion is developed to ensure a highdegree of interfacial contact.

    Effects of overdosing: Overdosing of Cebex 100 increases expansion and may cause frothing.

    Dosage: 

    OPC

    Concreting sand

    Water

    Cebex 100

    Approx yield

    50.00 KG

    -

    20-22 Ltr

    225 Gm

    36 Ltr

    50.00 KG

    50.OO KG

    22-24 Ltr

    225 Gm

    57 Ltr


    Storage:  
    Cebex 100 has a shelf life of 12 months if kept in a dry store in its original packaging. High temperature and humidity storage may reduce this period.


    Additional Information:

    • Production Capacity: 5000 KG
    • Delivery Time: EX-STOCK
    Yes! I am Interested

    ShaliGrout 73 - Non Shrink High Strength Fluidity Grout

    REQUEST CALLBACK

    ShaliGrout 73 - Non Shrink High Strength Fluidity Grout
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Usage/ApplicationCommercial
    Coverage AreaAs per Technical Data Sheet
    TypeCementitious
    Packaging TypeBAG
    ApplicationBridge bearing plates
    Packaging Size25 KG
    Grade StandardINDUSTRIAL
    Weight25 KG
    Item CodeShaligrout73
    ColorCementitious
    GradeHIGH
    BrandSTP LIMITED,BASF,FOSROC,SIKA,MYK

    Description :

    ShaliGrout is a non-shrink high flow grout specially designed for use where high strength and high fluidity is required. It is formulated as a natural aggregate system with a shrinkage- compensating binder and is highly flow-able without sacrificing strength or performance capabilities. ShaliGrout 90 is formulated to provide consistency and exacting performance in critical grouting operations. This also can be used as a repair product in various applications.

    Characteristics:

    Compressive Strength 70 mm cube, kg / Cm2

    -1 day

    -3 days

    -7 days

    -28 days

     

     

    · 350

    · 550

    · 750

    · 900

    Setting Time, 30 OC, Hrs.

    -Initial

    -Final

     

    · 4

    · 6

    Water content per 25 kg bag, Ltr

    -Flowable consistency

    -Pourable consistency

     

    · 4.125

    · 4.000

    Note: The above test results were achieved under Laboratory conditions. Tested at fluid consistency of 3.75 L of water per 25 kg Grout


     

    Application:

    • Heavy duty grouting of machinery and equipment in textile, cement plant, fertilizer unit, chemical, power, refinery etc
    • Petro chemical & fertilizer units
    • Bridge bearing plates
    • Anchor bolts and bars
    • DG sets Base foundation.
    • Fence posts
    • As micro-concrete for repair of large surface defects of bridge deck and concrete road.

    Packing: Available in 25 kg moisture resistant bags.

    Shelf Life: 6 months in original unopened sealed conditions.



    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
    • Port of Dispatch: All indian Port
    • Delivery Time: Ex-Stock
    Yes! I am Interested

     
    X


    Explore More Products

    Ratings & Reviews

    Nakoda Enterprises

    3.8/5

    ★★★★★★★★★★

    Rated by 24 Users

    • 5★12
    • 4★5
    • 3★1
    • 2★3
    • 1★3

    Contact via E-mail
    Contact via SMS
    Rajesh Jain (Manager)
    Nakoda Enterprises
    308, 3rd Floor Alankar Point, Rajgarh Kothi Compound, A. B. Road, Geeta Bhawan Square
    Indore - 452001, Madhya Pradesh, India
    Call Us: 
    Call Response Rate: 73%
    Share Us :



    Home  |   Company Brief   |  Our Products  |  Site Map  |   Contact Us

    © Nakoda Enterprises. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Nakoda Enterprises